Zhilitong Electromechanical Co.,Ltd
Product Testing Machine Manufacturer
Accessibility Probes, Fingers And Pins
Electrical Appliances Tester
Flame and Other Plastic Testing
Plug & Socket Tesing
Power Cord Testing
Universal Security Testing Machine
Safety Test Apparatus
IP Code Testing
Other Laboratory Testing Machine
For checking the protection against solid foreign objects to verify the degrees of protection IP5X “Dust- protected” and IP6X “Dust-tight”, in accordance with IEC60529/2001 figure 2 and IEC 60598
Dust Testing Machine
For continuous bending tests ,in accordance with IEC60335-1 clause 23.3
Internal Wire Flexibility Tester
To determine the mechanical strength of completed flexible cables, according to IEC60245-2 clause 3.2 and figure 2.
Completed Flexible Cables Static Flexibility Tester
To determine the mechanical strength of lift cables,according to IEC60227-6 clause 4.4.1 and figure 3.
Lift Cables Flexing Test Apparatus
Used to verify the protection of persons against access to hazardous parts,meets IEC61032 test probe C and EN Standards, including IEC 60529 for IP3 and suffix C codes
Test Rod Φ2.5mm 100mm Long with Dynamometer 3N±0,3N
The Spray Nozzle is a hand-held test device to verify protection against spraying and splashing water. The water pressure can be adjusted using the flow control knob on the device to give the required flow rate.
Spray Nozzle ZLT-JL1
For continuous bending tests by swiveling movements to check supply cord where it enters the appliance, in accordance with IEC60335 1 clause 25.14 figure 8 and IEC60745.1
Power Cord Flexibility Tester
The positive side of the battery is then connected by alligator clip to within diameter 0.5 mm of the twisted thermocouple wires to be welded.
In accordance with IEC60884-1 figure 21 and VDE0620 figure 21.
Flexing Test Swivel Machine
This probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code.Also used to verify protection from access with the back of the hands for an IP suffix A code.
Test Sphere Dia 50 mm with Handle ZLT-I01
Required by many Standards to test the mechanical integrity of product enclosures.
Spring Operated Impact Hammer ZLT-CJ1
Installed into the test machine ZLT-DW2, housing fitted with protective cabinet to screen off the conductor ends, which carry mains voltage.
Equipment to Load the Samples with Current